DnD Dice Book

All 3DTechDesigns STLs are protected under Copyright Law.
When purchased on Cults3D you have the right to print it for personal use.
To legally sell prints of my designs a monthly active subscription on patreon is required:
https://www.patreon.com/3dtechdesigns

---

REEL:
https://www.instagram.com/reel/C8uo13stHxf/?igsh=MW00b3c1dGV2amJjbQ==

This book box stores your favourite DnD accessories. It comes with different inserts, with one of them also being a functional dice tower, please check out the pictures to see the 3 different insert types A,B and C

To assemble the box, the only thing needed are two pieces of 1,75mm filament which act as the hinge of the book, you can then also secure the filament pieces with a small drop of CA glue.

If you decide to print the multicolor variant (meant for single material printers), you will also need to glue the different colored pieces together.

A multimaterial 3MF for BambuStudio is included, if you own a multicolor Bambu printer

Dimensions of the book:

• 150x115x55mm

Minimum printbed size:
180x180x180mm

UPDATE 2024.07.29:

• added a version of the book with the possibility to print the different accent colors as seperate prints. This is best suited for single extruder printers or to reduce print waste on multimaterial printers. The parts need to be glued together afterwards using CA-glue.

UPDATE 2024.08.29:

• added icon plates for 12 different character classes.

UPDATE 2025.01.12:

• added "PageBox_TypeD.stl", which can be printed instead of the standard PageBox.stl if you want to fit one or two card decks inside the book.
• added "PageBox_TypeD_Insert_Single.stl" & "PageBox_TypeD_Insert_Double.stl" in the "Compartments"-Folder, which can be used with the new "PageBox_TypeD.stl"

UPDATE 2025.03.08:

• added "Leather_Inserts_TopBottom_MC_Print" to the "MultiColor_Print_Book"-Folder, which was requestet by some customers. These can be printed instead of the scales
  if you prefer the leather look.