Ring Case: A Drop of Love (3-4 rings - 1U)

This case is designed for all rings, small and medium. It serves as a jewelry box, display, as well as travel box. It can contain 4 or 3 rings depending on their length on the finger.

IMPORTANT: The files you buy are sold under Copyright. This means that they cannot be sold or distributed for free. Additionally, you may not sell prints made from these files. If you did, you would jeopardize the creation of new designs. Thank you for your understanding.
YOU CAN HOWEVER SELL YOUR PRINTS OF MY DESIGNS by subscribing to the "3D print seller" subscription: https://www.patreon.com/LabLabStudio
ALL MY DESIGNS ARE INCLUDED IN THIS SUBSCRIPTION

You will find this case in 4 different versions. A simple smooth, a smooth perforated and decorated, a simple stamped and a perforated and decorated stamped. And each one is available in right-handed and left-handed versions. So there are 8 models in total.

The ring holders are in 2 versions. One for 5mm long rings, one for 1cm long ones.

The inner diameter must be at least 14.6mm and the outer diameter at most 24mm. As for the ornament, your ring must not exceed 30mm in its largest dimension. Refer to the diagram for a clearer idea.

A printing guide is included and you can find assembly videos on Youtube.

Part 1 : https://youtu.be/SIZjLgrg3ig
Part 2 : https://youtu.be/mUs2Y6nUUxI
Part 3 : https://youtu.be/hkvvF9I46PI