Pencil Can Cooler ( Multiple Sizes Available )

Pencil Can Cooler  ✏️ 

Bring a fun, classroom‑inspired twist to your drink setup with this Pencil themed can cooler. Designed to mimic the classic yellow No. 2 pencil — complete with eraser, ferrule band, and sharpened tip profile — this holder turns any standard can into a playful, eye‑catching display piece.

Perfect for teachers, office desks, school events, craft rooms, or anyone who loves clever, nostalgic designs.

Sizes currently available 7.5oz Mini, 12oz, 11-12oz Skinny, and 16oz.

I have designed the lid to where it easily twists on and will stop in roughly the same place each time.  This will also securely hold the can from coming out.

Hole for the straw is tapered and will line up with the hole in the top of the can.

Can easily be printed with PLA or PETG with minimal color changes.  Prime tower is not necessary if you set your purging volumes correctly depending on the color you are using.

When assembling the handle, I recommend to put a couple dabs of super glue on the ends of the pins that go into the side of the can holder.  But it is not necessary as they will lock in place.

Supports are only needed for the lid.  I highly recommend using a support filament, PLA, PETG or vice versa depending on what filament your are using as the support interface layer.  This will give you the highest quality finish on the bottom of the lid.

Turn on Contour Scarf Seams on your filament settings to help make the seams not as noticable.

Lid may not line up straight with the front at first.  But if you loosen and tighten a few times it will line up straight.

Feel free to add print profiles with logo's, etc..