April 14, 2026
Description
This cool Sofa Table is super practical because you don't need glue and no screws just a 3d printer
Print the Base and the Table legs with 95A TPU and the rest with PLA PETG or other material.
If you want to adjust the height of the Sofa Table then it is quite simple because a table leg is 10 cm long if you now wantto have table that is 50 cm long then you have to print 5 table legs and so on and so on
Size | Length | Width | Height |
|---|---|---|---|
Base | 15 cm | 10cm | 1,8 cm |
Table legs | 4cm | 2cm | 10cm |
table box | 20cm | 15cm | 5cm |
It may be that sometimes the thread clamps but that's no problem. I made a special instruction for this
you need olive oil or other oils the main thing is oil. and sandpaper
Step one
grind the threads carefully until they can be easily screwed into each other
Step two
Now brush the threads with oil
License:
Creative Commons — Attribution — Noncommercial — Share Alike