Low-Poly Pikachu

Do you like this 3D printable design? Want more exclusive low-poly models? Join my Printables Club!

🎁 New exclusive models every month 
💸 Sell 3D prints of my designs 
👀 Behind the scenes content

You can alternatively join my Patreon and enjoy the same benefits. 

---

Designing a low-poly Pokemon is the best way I found to represent the poor graphics quality the first Pokemon games had. So, here I present you the low-poly Pikachu, which is part of the Low-Poly project I'm developing.

3D printers allow to make real the idea of catching all Pokemon, and I'm currently working to make all the Pokemon I can.

This model is 5cm tall approximately. The model from the picture was printed with a Prusa i3, 0.2mm layer height, 0.5mm nozzle, 45mm/s speed and a cooling fan (I really recommend this!). The material is 3mm high-quality PLA.)

It was designed so it doesn't need support material, although each printer is different and it may be more difficult to print it depending on the settings.

The Chikorita model has two parts. I decided to split it because it made it possible to design a more complex Pokemon with better printing results, and also to allow people to combine two different filaments. You can download the complete file (which includes both body and leaf) or each part separately in case you want to print each part with a different filament.

// This design is based on Pokemon

---

Disclaimer: All project-related editorial content, including photos, text, videos, and other media, is protected by copyright. It cannot be used or shared without prior permission. The Creative Commons license does not apply to this editorial content.