Strong Slim Modern Paracord Lock - Smooth & Skull

Strong Slim Modern Paracord Lock - 550 and 425 Paracord Versions 

A truly locking lock for 550 paracord. (4mm) and 425 paracord (3mm) - When locked as shown in the proper use video, that cord is not coming uncinched. 

The 550 version will work with other sizes close to 4mm as long as you can get them through the device but it was designed with standard 550 paracord with a well dressed end. If you have janky knobs on the end of your cord, you need to fix that. I like to wrap the cord tight with some kapton tape. Cut with sharp scissors then melt the end with a lighter. Remove the tape for a very tight and tidy end. The end must be 4mm or smaller. No janky knobs allowed.

550 Version - Slim profile - 26mm Tall - 23mm Wide and only 7mm Thick. Parts snap together. NO GLUE REQUIRED.  See the assembly video. Its a tight snap. 

425 Version - 19.5mm Tall - 17.5mm Wide - 6.3mm Thick - Assembles identically. 

PLA is more than adequate for the part. PLA+, even better. 

Profiles for a smooth back or a back with a skull on it. Of course I made one with a skull on it. :) 

Need a 550 Paracord Connector? LOOK HERE. 

ASSEMBLY VIDEO

PROPER USE VIDEO