Fold Out Shoe Cabinet

This is a fold out shoe rack that hides your shoes out of the way in a cabinet. This is a very large print with many parts. The total dimensions are 490mm high, 530mm wide, and 308mm deep. It can hold 4 pairs of US size 10 / 27cm shoes.

There are 4 parts to this design: Case, Top, Rotating assembly, and Front. Each has there own print profile and all 4 are required.

Assembly guides for each part is included. There is also an assembly guide for the final assembly that brings the other 4 assemblies together. All structural parts have identifying markings on them that are referenced in the assembly guides for ease of assembly.

Some parts are large and utilize the whole build plate. Clean your build plate with soap and water before starting and often. This will ensure proper adhesion.

Update 2/17/25
Case Assembly print profile
C1, C2, C7, C8 - Added Ø4.5mm hole on the end for M3 heat set insert. This can be used to add feet and lift the case off the floor.
C18 - Added louvers. This will allow more airflow into the case.

Print time: 97 hours 13 minutes
Total Filament: 4,319.24g