Brush / Pencil Case

Brush / Pencil case with optional system to hold the tools in place while moving the case. 

*the case can hold up to 6 tools (brushes / pen / pencil) with max length 202.8 mm and max diameter of 13mm.
*no hardware needed and easy assembly.

*optionally you can use a office/kitchen rubber band to hold the tools in place while moving the case (to not damage the tips of the brushes).
To have a better result, you should arrange the brushes in order by diameter. Also you can use two rubber bands to increase the effect.
Please check the photo's for placement.

*insert the locking pin like the photo bellow. First is better to fit it without any glue, to be sure it fits ok and needs glue. You can add a drop of glue to be sure it will not move in the future after you tested and it fits fine for you. 

*Connect the two parts like in the photo bellow: