Life Sized Pokeball (no AMS)

This is a 1:1 scale Pokeball as shown in the shows. 

Regardless of what the slicer says, every single part can be printed without supports. The inner piece will be a little stringy if you do print without supports, but you won't see it once everything is assembled. There is some gluing required. I used crazy glue. Be careful to glue one side at a time. If you try to do both at once, it might drip and ruin the ball. 

I uploaded a 3mf file. But if you'd rather slice them yourself, I recommend using the Variable Layer Height and make the tops of each side as detailed as you can. You won't see any staircasing. Infill doesn't matter, and I suggest keeping it at 2 perimeters for each part. 

The end result is really nice to hold and it's one of my favorite things I designed.