May 25, 2025
Description
Min. height 66 mm
Max height 115 mm
Instructions:
I set print by object method because different layer heights.
Main item (bulid plate 1)
0,2 mm layer height
Ironing on top surfaces (I set 30mm/s and 30% (I think the correct setting depends on the printer and the type of filament)
Inner rod (build plate 2)
0,12 mm layer height
Boost MeIf you like it. Thank you!
An 8x2 mm magnet can be placed in the bottom.
On a flat surface, push the magnet in to make it nice and flat. Minimal superglue can go into the hole.
If you spray a little PTFE or similar lubricant inside the thread, the rod will rotate much better.
High-speed printing is not recommended due to fine details, acceleration speed decelerated.
It probably won't work if resized.
(FYI: The inner rod is white because even if I made it from Sunlu blue, I couldn't thread it into the hole. White and black can be easily threaded.)
Check out my other uploads and download and print them. RTX, Aorus, AMD, TUF, ROG, Ryzen, and many more.
!!! Make sure the print speed and temperature and cooling are set correctly for your printer and the filament you are using. And the build plate should be clean. !!!
License:
Standard Digital File License
CsTibikeee
