MFT - Magnetic Fidget Toy (6x3mm magnets)

Magnetic Fidget Toy

Uses total of 8 6x3mm magnets, 4 for each side.

Use N52 magnets ! Standard N35 magnets are not strong enough.

Printing:

0.2mm layer height, 3 walls, 5 top 4 bottom layers, 15-20% infill

Print with PLA 

no supports needed

You need a well calibrated printer for the magnets to go in smoothly. They should go in with a little force.

Assembly:

Insert the magnets to the top plate.

Check if magnets can be pressed to the lower body.

If everything goes together correctly, remove the top plate, add few drops of glue and press together.

Repeat for other half of the fidget, minding the magnets polarity.

If you like this fidget, try my other designs.

Magnetic Fidget Slider (6x3mm magnets)

Magnetic Fidget Slider - Bigger Version