Chibi Terminator Cyborg - Robot

Boost MeThank you all very much for your support, if you like this model and my work please leave a boost ^^

https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support.

 

 

Chibi Terminator Cyborg 

Bring the apocalyptic future to your shelf with this adorable yet menacing Chibi Terminator Cyborg! Designed for FDM printing at a fine 0.12 mm layer height, this model is available in two sizes:

• Small – 70 mm height
• Medium – 120 mm height

This compact mechanical menace combines the iconic skeletal endoskeleton of a classic Terminator with a stylized, oversized chibi head—complete with glowing eye sockets and mechanical panel details that capture the essence of cybernetic doom in a cute, collectible form.

Perfect for sci-fi enthusiasts, collectors, or fans of pop culture mashups, this model prints in one piece with support structures required, but they remove easily with minimal cleanup. Whether you display it solo or as part of a post-apocalyptic diorama, the Chibi Terminator Cyborg stands as a tiny guardian from the future... or your desk buddy with a laser focus!

 

     Guide

 

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

 

 

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

 

 

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

  Recommendations:

• 
   
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support