CUSTOMIZE CLIPS

CUSTOMIZE CLIPS

I created this model to ensure that everyone can adapt the clips to their every need.

 

With a template that is quick to edit but also quick and easy to print.

 

Can be used in all fields of work and hobbies.

 

For example, these clips can be used for:

- Pipes (plastic, iron)
- Cables of all kinds
- Order equipment
- Order vacuum cleaner nozzles

 

And many other things.

 

ADVISE

FOR A TIGHTER FIT, I RECOMMEND DECREASING THE TUBE DIAMETER BY 0.2/1 MM.

CUSTOMIZATION:

• First Solution

         Just press the button

and then modify all the measurements to your liking.

 

IMPORTANT: I recommend changing values in 5 mm increments (e.g., to go from 60 mm to 50 mm, adjust to 60, then 55, and finally 50). Larger changes might cause sketches to fail and the model to break.
If the model does break, simply click Reset all parameteres and try again using smaller steps.

• Second Solution

1. Download the f3d file :

2. Open the .f3d file in fusion 360

3. In the “MODIFY” tab, select “Change Parameters” :

4. A window will appear showing the parameters. Only adjust the three parameters listed under the “Favorite” section (unless you're confident in your skills and know how to fix a broken model :)
   IMPORTANT: I recommend changing values in 5 mm increments (e.g., to go from 60 mm to 50 mm, adjust to 60, then 55, and finally 50). Larger changes might cause sketches to fail and the model to break.
   If the model does break, simply click Undo and try again using smaller steps.

 

I hope you like this model and above all that it is as useful to you as it was for me.

 

UPDATES

26/10/2025  Improvement for clips with smaller diameter and flap opening angle.

 

If anyone has any requests or improvements to make to this model, please write to me so I can try to make them available.

 

OTHER PARAMETRIC MODELS

 

Boost MeDo you like my project? Would you like to leave me a boost so I can always create new things.MembershipIf you liked my project and want to support my profile, so that I can always upload new projects. SUBSCRIBE