Pickle Rick Magnet - "I'm Pickle Riiick!

"Look at me, Morty! I turned myself into a pickle! I'm Pickle Riiick!"

Bring the smartest (and craziest) scientist in the universe right to your fridge. This Pickle Rick model is designed for full-color printing and features a dedicated slot on the back for a magnet.

The model features high-quality textures on both the pickle skin and the simulated duct tape.

🖨️ Print Profiles

I have uploaded two different print profiles to suit your AMS setup:

1. 4-Color Version (Standard AMS)

Ideal if you have a single AMS unit (4 slots).

• Design: The pickle body and the duct tape are printed as separate parts.
• Colors: Optimized to use only 4 colors at a time.
• Assembly: Simply print both parts and attach the tape to the body using a drop of glue (CA glue/Superglue). The fit is precise!

2. 6-Color Version (Dual AMS)

For advanced users with two AMS units.

• Design: Prints as a single, solid piece (body + tape fused together).
• Colors: Requires 6 distinct colors (Light Green, Blue, White, Black, Red, and Grey for the tape).

🛠️ Materials & Settings

• Material: PLA (Bambu Lab PLA Basic or Matte work great).
• Supports: No supports needed. Print with the flat face down on the plate.
• Infill: 15% Gyroid is sufficient.
• Layer Height: 0.12mm Standard.
• Nozzle: i used 0.4mm but with 0.2mm the details will be amazing.

🧲 Magnet Installation

On the back of the model, there is a hole designed for a round neodymium magnet.

• Hole Size: i use a 5mm diameter and 3 mm height magnet, the hole are 0.2mm tolerance and fits perfect (5.2mmx3.2mm).
• Dont need to use superglue to secure the magnet in place.
• If you have a different size of magnet, you can change the size of the cylinder, but if you have problems with that let me know and i create a profile for you.

Hope you like it! If you print one, please upload a photo of your "Make" and leave a rating ⭐⭐⭐⭐⭐. Wubba Lubba Dub Dub!

i only printed the 4 colors version if you print in 6 colors please let me see it!