Creality Ender 3 V3 KE - Linear Rail Upgrade

**SPECIAL NOTE: I've installed this only on my printer, if your printer is different, let me know and I will see if I can find a way to help. Watch the video, if you're just looking for the install, skip to that part.

UPDATE NOTE: I've added an experimental Plate adapter for the 12H Carriage, if you try it, please confirm that it works, and I will remove the 'EXPERIMENTAL' from the name.

Print from ABS/ASA/PETG (CF Is better) - I don't recommend PLA

USE the thinnest LH possible for your printer

0.4 Nozzle, 6 Walls, 6 Tops/btms, 35% Gyroid or Cubic infill

M3 x 12mm (4pcs) - For Front Adapter & Y Axis motor

M4 x 20mm (4pcs) - For Rear rail to base adapter

M3 x 8mm (16pcs) - For Plate Adapters to Carriages

M3 x 8mm (12pcs) - For Rails to Front/Rear Adapters

M3 x 4mm Heat-Set Brass (20pcs) - For All Adapter Plates

US Amazon Link for Linear Rails: (This link supports the channel) https://amzn.to/4a5YP9w - You'll need 2 'C' Carriages per rail (4 carriages total) Linear rail carriages can be purchased separately if you can't find the kit- Model # MGN12C-350mm