Custom Name Keychain Tag (3-Line) - Chamfer/Fillet

Make a clean, durable, and highly customizable personalized name keychain directly on MakerWorld using the Parametric Model Maker customizer. This generator is designed to produce a smooth, printable custom text keychain with a strong integrated ring that stays connected to the outline (stroke) and supports 1 to 3 lines of text.

Perfect for:

• Personalized name keychains
• Bag tags / backpack tags / luggage tags
• Gifts for kids, school labels, party favors
• Quick custom keychain tags for friends, teams, events, and shops

Key Features (Parametric Generator)

• 1-3 lines of text
  • Defaults: PIXEL / BUILD / UP
  • Auto centered layout with adjustable line spacing
• Font picker (TTF fonts)
  • Works with MakerWorld PMM //font selection
  • Note: fonts must be installed on your system for OpenSCAD/PMM to render them
• Text style
  • raised (embossed) or engraved (debossed)
• Base shape modes
  • minkowski_text (rounded “puffy” outline look)
  • text_outline (fast outline via 2D offset)
  • rounded_rect (plaque style)
• Ring that stays connected
  • Ring placement mode includes a “stroke” attach strategy so the loop overlaps the base outline for strength
  • Adjustable ring size and overlap
• Ring edge finishing (NEW)
  • Optional chamfer or fillet on the ring top edge using the same edge-finishing engine
• Edge finishing on base + text (NEW)
  • sharp, chamfer, or fillet on:
    • base top edge
    • text top edge
  • Steps can be set to 0 for auto / minimal stepping behavior depending on style
• Dual color / single color
  • MakerWorld color picker compatible hex codes ("#RRGGBB"; // color)
  • Default palette:
    • Base: Orange #FF7A00
    • Text: Teal #00B3B3

How To Customize (MakerWorld)

1. Click Customize on MakerWorld.
2. Enter your name/message on TEXT_LINE_1, TEXT_LINE_2, TEXT_LINE_3.
3. Pick your font using FONT_FAMILY (font picker).
4. Choose colors:
   • BASE_COLOR (orange by default)
   • TEXT_COLOR (teal by default)
5. Set finishing:
   • BASE_EDGE_STYLE / TEXT_TOP_STYLE / RING_EDGE_STYLE = sharp, chamfer, or fillet
   • adjust sizes and steps as desired
6. Download and print.

Tip: for the smoothest top surface, print face-up for clean chamfer/fillet visibility, or face-down if you prefer the build plate surface finish (depends on your printer/plate).

Print Recommendations (Fast + Strong)

These are general settings that work well for name keychains:

• Material: PLA (easy), PETG (more durable), TPU (not recommended for crisp raised text)
• Layer height: 0.20 mm (quality), 0.16 mm (finer text)
• Walls/perimeters: 3-4
• Infill: 10-20% (gyroid/grid)
• Top/bottom layers: 4-6
• Supports: not needed
• Brim: optional if your text is very thin or your plate adhesion is weak

For multi-color:

• Print with AMS/multi-material, or
• Do a manual filament change at the text start height (for raised text).