Fortnite Chest

Yes, this is the famous chest from fortnite - print it, assemble it, loot it!

 

The 3mf file shows my recommended orientation of the parts. There are three plates, one for each colour (yellow, light grey, dark grey). The top part of the chest needs support, I am using PETG for the support interface. All other parts are support-free. If you need a brim for the small parts depends on your filament and your bedplate. To optimize adhesion you might want to use a very thin layer of glue stick.

 

Assembly is straight forward. Glue everything in place. Be carefull with the hinges: Place the top part of the chest on the bottom part, then glue the hinges in place. By doing so the position of the hinges will be perfect and the lid closes without a gap. The handles do not need glue.

 

GG loopers!

 

 

EDIT 2025-01-31
I uploaded an alternative print profile that does not use PETG for the support interface. 

 

Boost MeLike it? Boost it!

 

If you want to support me you can leave a tip at ko-fi.com/blecheimer.

 

Disclaimer:
This work by blecheimer is licensed under CC BY-NC-SA 4.0. The shown model is fanart and must not be used commercially.
Copying this model to other 3D printing websites is not allowed without my permission.