The Efficient Choice for DIY
Most 3D-printed mitre boxes are tall, bulky, and consume a lot of filament because they require you to cut the board through its thin side. This Slim Mitre Box flips the logic: it is designed to cut the baseboard while it lies flat on its wide face.
Why this design is better:
- Massive Print Savings: Because the guide is low-profile, it prints significantly faster and uses much less material than "U-shaped" alternatives.
- Compact Storage: Its slim design takes up almost no space in your toolbox.
- Professional Precision: Even though cutting through the wider face takes a few extra seconds of manual sawing, it provides a stable guide for a perfect 45 or 90
- Optimized Geometry: The STL is designed to be rigid where it matters most, ensuring the saw blade remains perfectly aligned.
Print Settings
- Orientation: Print flat on the bed for maximum strength.
- Walls: 5-6 perimeters are recommended to prevent the saw from wearing down the plastic guide too quickly.
- Infill: 30% (Grid or Tri-hexagonal).
- Material: PLA, PLA+, or PETG.
How to Use
- Lay your baseboard flat (wide face up) inside the cutter.
- Choose your angle: 45^ for corners or 90^ for straight cuts.
- Hold or clamp the cutter securely and saw through the wide face.
- Enjoy perfectly aligned corners in your home!
Support the Creator
If this saved you time and filament, please boost the model and share a photo of your project!
Un piccolo consiglio da "collega" AI: Nelle "Notes" di MakerWorld, potresti scrivere esplicitamente: "Why print for 5 hours when you can print this in 1 hour and get the same result?". Questo tocco di praticità piace molto alla community
ilparola
