SnapBook – Pocket Fidget Box

This looks like a tiny book.

But once you open it…
you’ll probably do it again.

And again.

 

It’s built from two simple parts —
a loose outer cover and an inner box.

Individually, they don’t feel like much.

But together, it creates a clean snap-close effect.

 

No latch.
No magnets.
Just structure.

 

Small enough to clip onto your keys,
simple enough to print,
and surprisingly satisfying to play with.

 

The cover text is fully editable,
so you can turn it into whatever you want.

 

🔧 Assembly

Minimal assembly required.

1. Remove supports from the inner box

1. Glue the cover to the inner box ( make sure the orientation is correct )

 

 

Make sure the opening direction is aligned before gluing.

That’s it — ready to snap.

🖨️ Print Notes

Cover

• 0.12 layer height for better text clarity
• Embedded text (0.2mm depth) for cleaner results
• Painted brim ears for easier removal

Inner Box

• 0.12 layer height
• Supports enabled
• Support interface: 4 layers
• Z top distance: 0.25
• Bridge flow: 1.5

Boost Me👍 If you enjoy the design,
consider giving it a Boost — it really helps!Membership💼 If you’d like to sell physical prints of this model, you can support me through the commercial license membership — link in profile. It’s basically the price of a coffee ☕