Benchy Bambu Pla Basic

This .3mf for 3DBenchy uses the same setting as the sliced file “SpeedBoatRace_Bambu Pla Basic” in the A1 mini SD card . The print time is around 12min42s .

As the printer profile & filament profile is modified a lot , so please use the "Open in Bambu Studio" button to import the .3mf into the Bambu Studio.

Note :

1. The bottom layers in “SpeedBoatRace_Bambu Pla Basic.gcode.3mf” in some early produced A1 mini was wrongly set to 2 , which should be 3, this .3mf fix this .
2. As the first layer speed is fast , the adhession is critical , so make sure that the build plate is carefully washed before print .

#3DBenchy

3DBenchy.com

https://www.3dbenchy.com/