IDF Insignia Pendant

Show your support for Israel and its brave defenders with this pendant showcasing the insignia of the Israeli Defense Forces (IDF)! Wear it as a necklace or on a keychain. Or scale it down for earrings. (I recommend using a 0.2mm nozzle if you scale it down.)

Recommended Print Settings:

0.4mm nozzle (switch to 0.2mm nozzle if scaling the model down)

0.2mm layer height

15% infill, gyroid

Arachne walls

No supports. No brim.

Photos shown are printed with Protopasta Bronzefill using a 0.4mm nozzle and Generic PLA default profile, with 0.2mm layer height, 15% gyroid infill, and arachne walls.

STL Files:

1. IDF Badge.stl = just the insignia without a pendant loop. Feel free to incorporate the insignia into other models that support Israel.
2. IDF Badge_with loop = the insignia and loop as a single object

***Note: Plate 1 of the Bambu Profile I uploaded includes the IDF Badge with the loop as an added generic torus part so that you can reposition/resize the loop as needed.

Please note: I am publishing this model under a non-commercial license. However, you MAY use this model for commercial purposes IF AND ONLY IF you donate at least 50% of your proceeds to a verified charity that is supporting Israel’s self-defense efforts - including efforts to support the IDF, Israel’s hospitals and medical personnel, or Israel’s humanitarian needs. Thank you.

Am Yisrael Chai!