HSW Cutter Holder

Boost MeThis design is free—if you enjoy it, a boost means a lot.
if you don’t have boost, you can Fallow Thanks

Wire Cutter Holder for the HSW

 

Compact holder that can be printed without support.

Easy to Snap to your Honeycomb Storage Wall.

3 Different variations.

 

 

 

Cutter Dimension

This holder is designed based on the generic wire cutters with the following dimensions.

• T Thickness must be less than 13.5 mm.
• W The cutter must have a minimum of 37 mm when it is in compression.
• H Approximately 130mm height.

 

 

Print orientation:

Print flat as the image shows. No needs support.

Print Settings:

• Material: PLA/PETG
• Layer height: 0.2
• Perimeters: 4
• Infill density: 25%

 

EDIT 16/08/2024:

Added Small Plug Variant

 

Happy Printing!!!