July 30, 2024
Description
Pre-printing suggestions:
1. It is recommended to increase the first-layer traffic volume to 1.02~1.05.
a. Bambu Studio Preferences Setting > Activate Developer Settings
b. Quality > Advanced > First Layer Flow Ratio：1.02~1.05.
2. Use textured PEI.
Assembly parts and tools:
1. White or RGB LED Strip light is required, I use 5V USB Cable controller and LED Strip light.
2. The LED light strip can be fixed with hot melt glue or double-sided tape.
3. The USB light hole is preset to 15x5mm. If it does not fit the LED light strip you purchased,
you can use a soldering iron to enlarge the hole.
License:
BY-NC-ND
mail.iou
