Litophane Stand

Drawing made with Fusion 360, base for lithophane created after purchasing female USB cables from one end and male USB from the other end with a central USB power button, consequently I took some cheap LEDs powered by USB port, I leave you the links of the articles I cited and in the photos there are the parameters to satisfy for the creation of the lithophane on the site, remember to cut your starting image until you obtain a final format of 770x1024 before moving on to the creation of the lithophane on the site, this site gives the possibility once the lithophane has been created to also download the image to be applied on the back to be able to see it once illuminated in color (I put in the photos a lithophane with a color image applied on the back with spray glue). Here are the links:

https://tool.itslitho.com/CreateModel

https://it.aliexpress.com/item/1005005504346731.html?spm=a2g0o.order_list.order_list_main.42.3f443696pXa8Jm&gatewayAdapt=glo2ita

https://it.aliexpress.com/item/1005005073223181.html?spm=a2g0o.order_list.order_list_main.62.3f443696pXa8Jm&gatewayAdapt=glo2ita