PET COUCH/ SOFA (for cats and small dogs)

Boost MePlease consider boosting me if you like the model 💗

I designed this cat bed using Fusion360.

 

It is a pretty large print (if you print it full size), each peice fits on the bed and requires minimal supports.

 

The model can also be scaled without issue. 

 

Print Profiles

Here is a table with a description of each print profile and the amount of filament used for each one. I strongly recommend using the highlighted first profile “Lightning Solid, 3 walls, 15% infill”, as it should be solid enough without using too much filament.

Profile	Info	Filament used	Supports used	Total used
Lightning Solid	3 walls 15% infill	727.42g	27.02g	754.44g
Lightning Hollow	3 walls 15% infill	800g	164g	964.62g
Grid Solid	2 walls 10% infill	1143.89g	27.32g	1171.21g
Grid Hollow	2 walls 10% infill	962.31g	163.09g	1125.41g
Lightning Solid	2 walls 15% infill	595.33g	27.09g	622.42g
Lightning Hollow	2 walls 15% infill	600.65g	116.72g	767.38

For the last 2 print profiles, just change the amount of walls from 3 to 2 when using the lightning profile - but please proceed with caution! Especially if you have a larger kitty XD

 

Tips

• The connectors are used as a guide, please glue each peice together!
• If you run into trouble with the .3mf files, please use the STL files provided.