Falcon Heavy Rocket Launcher

Description

SpaceX Falcon Heavy Air Pressure Launcher

I hope you like the Launcher and it would be great if you give me a like and follow😉
Update V1.15 => Changes at the bottom

Boost MeBoost the Launcher 🚀

What it is:

Its a little Rocket Launcher Toy in an Falcon Heavy Design!

You simple hammer the button and the rocket flies up through the air pressure.

The button is spring loaded with a easy printable spring.

The tower is only decorative, i tried to look similar to the SpaceX tower:

Real vs Model 😊

Printing:

I printed all parts in PLA+ but other materials could work better like the spring in PETG. Try and share your knowledge.

No support needed!

Your Printer need an good accuracy for the button and the rocket! They should fit nicely and seal a bit. But they should not clamp!

With my X1 Carbon it turned out well. Scale the rocket and the button a little bit (<1%) if they are to tight or to lose.

Assembly:

Print in Colors you like most👌

New Spring design, assemble as shown

Insert the spring and press the tower in the base.

Load Rocket and Button. You could add a bit of grease into the push button to seal it better.👍

Check the accuracy of your print, if you can get it smooth like that, the rocket flies very good!

Next:

I want create an alternative Tower and alternative Rockets! Stay tuned.😎

Or you want a NASA Button?

Update V1.1:

Update V1.15:

Remove the Text from the Falcon, some users got no tight rockets. You can print/ download the Falcon with Text still under “additional Rockets” profile.

Happy Printing and enjoy👍

Commercial license you can get here:

License:

Standard Digital File License