Earring Tag with custom text

Earring Tags/Backing.

Tags are fully customizable the main one is 40mm x 40mm x .75mm thick and the longer one for 3 stud pairs is 60mm x 40mm x .75mm

The earring holes are 0.2mm and can be resized or cloned to add more below for studs.
The Hole for the “rack” is 10mm but the ideal size would probably be 8mm. this can also be sized down if you prefer. They are at 10mm to stay on the safe side.

No brim or supports.

You can edit the text or remove it completely.

To edit the text in Bambu Studio go to Objects.

Click on: Text_Shape.

In the top upper right Click on Ta

In the Ta settings you can change the Font, size, thickness, as well as the text. to change the text change the input text from “Edit Text Here” to whatever name you prefer. You might need to change the sizing a little bit and recenter everything.

You can also lower the text more into the back and rotate it so that the text is on the face plate - I did not personally do this because i know smaller text can get messy on the plate.

I hope you enjoy! This is my first makerworld release.

I made this in orca slicer and bambu studios combined. If you have any questions you're welcome to reach out!

You are welcome to sell these as well with all of your earrings or make them for another jewelry maker.