Brake Fluid Bleeder Baseplate

If you have the same problems we do in our workshop, that these brake fluid bleeders tend to fall over a lot. I made this baseplate with strong magnets for our shop.

I recommend printing it in PETG since they last abit longer with all the rough-housing we tend to do with our tools. The one we use now have been in use for over 1year with minimal wear.

The one we use are similar to this one: https://www.amazon.com/s?k=brake+fluid+bleeder+kit&crid=2FC4FAHA70BY6&sprefix=brake+fluid%2Caps%2C201&ref=nb_sb_ss_ts-doa-p_5_11

They all tend to be the exactly same fit on these, so if you have one similar. This print should fit.

The magnets i used, are these: https://www.supermagnete.de/eng/disc-magnets-neodymium/disc-magnet-15mm-3mm_S-15-03-N52N
specs:
15mm diameter.

3mm thick.

holds 3,7kg each

You dont need the magnets, its just a nice touch so when you walk in to them they stay put. But i wont recommend using magnets that are weaker, i tried and they wont work.