Pottery Bowl Press/Mold (parametric)

You can change the dimensions (tolerances for example) of this model in fusion360 through parameters.

Since the base and handle are detachable, you can use this model as a press (use plastic or cloth in between the model and your clay for better results), or you can lay the clay onto the model (and form it around it) and use it as a mold.

Printing Information:

• Print the base upside down (flat side down)
• Print the handle and the connector upright
• Use a brim to support the tall pieces by increasing their adherence to the printbed
• Use regular supports to support the top of the connector holes while printing

Inspired by BENECREAT Pottery Moulds