Knob for Jobmate Drill Press

I was given a Jobmate 55-5901-6 drill press but it was missing one of the knobs, and another one is cracked and likely will eventually break. I created this replacement part.

It has modeled M8x1.25 threads with loose enough tolerances that it shouldn't need to be tapped assuming your printer is relatively accurate. (Tested on a stock Bambu Lab P1S)

I designed this to be printed without supports. My final print was done in black PETG at a 0.2 layer height with no supports, and I also did a test print in PLA which worked fine. Print in the supplied orientation. Do not rotate.