Grit Globe - Hand Sander

The globe handle screws down to tighten everything together.

If you trace the template on the back of a piece of sandpaper you will get the exact size you need to fit on the sander. 

1. The hole punch is used for making pre-holes for the anchor points on the sander. If you choose to use the hole punch, there is a slight indentation on the top of the template where the hole puncher can slip over.

      2. After you have your sandpaper wrapped around the sander, you slide the plate over top and press                     down firmly it will help to flatten the sandpaper around the anchor points. The plate should sit flat, so             press hard enough that it does so.

      3. After you have the plate on screw on the globe handle and your good to go. You can sand away and                 you should have any problems.

It super handy for sanding small flat surfaces. You can hold the sander upside down and sand your piece back with the other hand.

Also try my other sander. Stem Sander by jSamz12 | Download free STL model | Printables.com