Building Kit - Excavator - Little Mechanic edition

Simply Exccavator. The model can be disassembled into individual parts at any time with the help of the attached screws, it is possible to replace the wheels with alternative wheels.
The model should practice children's motor skills, control of tools (screwdriver and screws) and at the same time involve them in playing with the model.
This is the second model in the series, where several more models in a similar spirit are planned to be used. Watch my new models and have fun :)
***************************************************************************
Recommendation:
after printing the individual parts, check whether there are no sharp edges on the model, residues after printing, remove these with an edge-knife, file, or sandpaper.
Use a screw: if the screw is to be screwed into the model, I recommend using a little strong dry soap or soapy dry crack on the screw - excessive force can destroy the model, dry soap can help.

***********************************************************************
The print plates are named, basically the tree support is used (light edition), whether automatic or manual. I recommend watching the name of the print plates. Otherwise, 0.2 layer 2-3 perimeters, 10-15% infil is enough (I used 10% gyroid)

 

Tree support on whell base