Fringe Twister

4 clip Fringe Twister that my weaving partner requested.  The large block is designed for either suction cups to secure it in place on a table, or with the centre hole can be clamped in place to secure it using something like a simple clamp brace

You'll need to print 4 of the spines.  I was able to print the spines without supports, but it gives a better finish to print the large block with (organic/tree) supports. 

Assembly is straight-forward: clip each of the spines into the small block with a small amount of force. Then align all 4 and push them through the holes in the large block.  Then push on each crocodile clip.  The standard clips should push on and re-crimp but a bit of glue may be useful to hold them in place, depending on the clip.

How to use a fringe twister: