Printing Parameters:
- Material: PLA
- Resolution: 0.2 mm
- Perimeters: 2
- Infill: 15 %
- Supports: no
- One color or add color changes at 12.6 mm, 57.4 mm and 88.0 mm
Tips and Tricks:
- Deburr the wheel
- Protect the wheel with some tape
- Use pliers and apply some force in direction of rotation to loosen the wheel
- Add a small amount of oil into the gap
- Press in a round magnet with a bit (diameter 4 mm, length 4 to 12.5 mm)
- Change magnet polarity for each screwdriver to pair them
Updates:
- 30-10-2024: Add PrusaSlicer file
- 22-10-2024: Add V2 with wheel
License:
Creative Commons — Attribution — Noncommercial — Share Alike
PointNemo
