Star Wars Imperial Star Destroyer

If you want to rescale this model, take a look at the small_scale versions. Some parts like the thruster and sensor array are thickend in these versions, because otherwise they become to small to print at lower scales.

Included is a simple stand.

Print Instructions

Printed at 0.2mm layer height. Needs support on buildplate.

For slicing Chimaera, either:

• use “print_sw_isd-chimaera_both_sides.stl”, which has the emblem on both sides, or
• use "print_sw_isd-chimaera_underside_only.stl", which has the emblem only on the underside, or
• use “print_sw_isd-chimaera.stl”, then manually add “print_sw_isd_chimaera_emblem_topside.stl" and/or “print_sw_isd_chimaera_emblem_underside.stl” as a part

Check out my other Star Destroyer models:

• Venator Star Destroyer (Republic)
• Resurgent-class Star Destroyer (First Order)

If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#

UPDATE: Added the Tector-class Star Destroyer

The Tector pretty much only exists because of one scene in the Battle of Endor where the Falcon flies along the underside of an ISD missing its hangars and reactor dome.

I could not find a definitive source for how its topside looks like. All images I could find are fan-creations and they either used the ISD I or ISD II. I went with the topside of an ISD II.

UPDATE 2: Changed how the Chimaera emblem is created

This barely affects the print apart from the fact that you only need two emblem-files instead of 12. It does make it a lot easier for me to create new emblems or add them to other ships.

UPDATE 3 [2022-10-02]: Added Chimaera_both_sides and Chimaera_underside_only, changed the bridge

I've added version of the Chimaera with the emblem already added on both sides ("print_sw_isd-chimaera_both_sides.stl") or only on the underside ("print_sw_isd-chimaera_underside_only.stl"), in case you find it difficult to add the emblem yourself.

There are two changes to the bridge. The sides of the bridge tower now slope inwards and are no longer perfectly vertical, making them more accurate. The two shield generators on top of the bridge have a bit more details with several individual struts connecting them to the bridge instead of just one.

UPDATE [2023-04-23]: New Photos