Tesla Model 3 2021 Frunk Hook

To avoid smaller items rolling around in my Tesla Model 3 (2021) frunk, I was interested in a secure post or two that I could attach items to.  The Model 3 has two adjacent bolt wells in the frunk that can double as securing points.

NOTE:
Earlier Tesla Model 3 designs (prior to 2021) have a different frunk layout, so are incompatible with this part.

My design makes use of the frunk nearby bolt wells.  I designed and printed a post that is shaped with a hook and is a push fit into the bolt well.  To avoid post movement, I included a thin slice of silicone tape to improve the fit.

For temperature reasons, my posts are made with PETG.  Other filaments that can withstand the warm temperatures that a car is likely to experience (eg. 60C) would be suitable, too.

Here is my 3D design.  My design may match your needs, too.

Part of my print is made in 1.75mm black PETG filament, with 0.2mm layer height and 25% infill on a PRUSA I3 MK3S printer.  No print supports, rafts nor brims required.

I hope you can find this design useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.