November 17, 2024
Description
Here is: Christmas Wall or Table Decoration - Santa Claus
Print at 100% infill with a layer height of 0.16mm with a base layer of 0.16mm
The Model is 99.7x100mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.1mm and the Actual Depth is 2.1mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic White Transmission Distance: 5
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #9 (1.44mm) swap to White for the rest.
License:
Creative Commons — Attribution — Noncommercial
29flo
