November 17, 2024
Description
Presenting: Christmas Wall or Table Decoration - Snowy Gingerbread House
Print at 100% infill with a layer height of 0.16mm with a base layer of 0.16mm
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #9 (1.8mm) swap to White for the rest.
You can adjust X and Y on scale. Do not play with the Z.
If you want maximum details you can adjust line width (0.4mm nozzle) or just use 0.2mm nozzle.
License:
Creative Commons — Attribution — Noncommercial
7
29flo
