Golf - Golf Ball Marker - NHL - Metropolitan - Pittsburgh Penguins

Pittsburgh Penguins NHL team golf ball marker (25mm diameter by 2mm height and 10mm spike).  2 versions available (embossed for SLA and single filament printers and a multifilament version for multifilament FDM printers).

Usage

• Place on the green to mark your golf balls location when it is in the travel path of a golf ball further away from the golf hole.

Printing Tips

• For SLA printer use an ABS like resin with 0.05mm layer height with supports on an angle.  Print using light color filament or resin for visibility
• For FDM multifilament printer use the multifilament version file and print at 0.1mm layer height, face down with no supports.

Finishing Tips (for painting logo on embossed version)

• Apply acrylic paint to logo surface with fine brush or Q-tip
• Wipe off paint with paper towel immediately after applying
• Allow to dry then gently sand of any excess paint
• Apply clear resin to surface to seal

Support

If you are interested in a well priced SLA printer and want to check out the Anycubic Photon M5s Pro SLA printer (I use this one) or other Anycubic printers and want to learn more please go to Anycubic Store.   For $25 off use this CPMTPFIZJP coupon code at the Anycubic Store.