Humidifier Water Flexible Hose Holder

The valve on an old humidifier failed and was replaced.  The new valve had ¼" for both the inlet and outlet tubing.  The copper intake from the old valve was ¼" with a larger diameter output for the metal tubing and would not work with the new valve.  New ¼" plastic tubing was used to replace the metal tubing but needed a printed part to hold it in place.

This model was printed with TPU and used to hold the new ¼" tubing in place.  The part was inserted into the bottom of the humidifier cap.  The hose was put through the part, and everything is held in place with a zip tie.

The parametric model was designed in FreeCAD and can be adjusted for different use needs.