Customizable Candy Cane Signpost Ornament - no MMU/AMS needed!

Customize this holiday ornament by adding your own street name to the candy cane signpost! A perfect gift for the holiday season, everyone loves a personalized ornament! 

This is a very fast print, finishing in only 13 minutes. 

Can be easily printed in multicolour by using layer changes, as each colour used is at a different layer height. Alternatively, an MMU/AMS can be used if you wish. 

Printing instructions:

• Infill: Any infill
• Layer height: Use 0.2mm layer height
• For customizable text: In your slicer, right click on the signpost, click ‘add part’, and add text to the left signpost. To match the font on the ‘North Pole’, use the American Typewriter font with a height of 8 to 9mm, and a depth of 0.4mm

For colour without MMU/AMS:

Add a colour change at layer 16 (3.2mm), 18 (3.6mm), and 20 (4mm). The order of the colours used should be white>red>green>white. 

Or, after slicing click ‘’ to have the slicer automatically place colour changes at the correct layer.

For colour with MMU/AMS:

Simply colour the parts to match the photo (or make your signpost and candy cane any colours you wish!)