Winter Haven - Christmas Bauble Ornament

__________________________________________________________________________________________________________
☀ If you want to sell prints of this model, as well as all of my models - future and past, become an Authorized Merchant member of my Patreon for a commercial license! ☀
____________________________________________________________________________________________________________

Step into a winter wonderland with Winter Haven ❄🌲🏠, a serene ornament that captures the magic of a snow-covered cabin glowing warmly against the chilly night. From the softly illuminated windows to the frosted evergreens surrounding it, this piece brings to life the peacefulness of a quiet winter evening. The snowy textures and delicate details make it feel like you could walk right into this cozy retreat by the fire. Perfect for adding a touch of warmth and nostalgia to your Christmas tree or holiday decor! 🌨✨🌲

• 6 and 4 Color Versions - Pick the prefered File
   
• Two Ornament sizes 160mm(BIG) and 120mm(SMALL) - Pick the prefered File
   

For best results use 0.2 nozzle if possible, but 0.4 is also works great (The pictures show a model printed with a 0.4 nozzle)
The design allows for printing with simple color changes at layer, which saves a lot of filament!

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Jayo Gray Transmission Distance: 2.1
PLA Kingroon Gray Transmission Distance: 2.4
PLA Geetech Matte Light Gray Transmission Distance: 0.7
PLA Kingroon White Transmission Distance: 6.9
PLA Kingroon Orange Transmission Distance: 4.5

Color Pallete (6 Color Version):

Color Pallete (4 Color Version):

Swap Instructions(6 Color Version):

Start with Black
At layer #16 (1.37mm) swap to Dark Gray
At layer #21 (1.77mm) swap to Gray
At layer #26 (2.17mm) swap to Light Gray
At layer #29 (2.41mm) swap to WHITE
At layer #35 (2.89mm) swap to Orange for the rest.
Swap Instructions(4 Color Version):
Start with Black
At layer #16 (1.37mm) swap to Dark Gray
At layer #22 (1.85mm) swap to WHITE
At layer #35 (2.89mm) swap to Orange for the rest.