BB Gun | 4 Shots | built in magazine

31.12.2024

Version 3 is now available! It features an 8-round magazine, stronger spring, easier printing of bridges, stronger lever!

Check it out here: https://makerworld.com/en/models/934485#profileId-899040

Version 2.0 is released!

Featured: fully 3d printed (no hardware required) | improved range over 5m | facelift 

click here:https://makerworld.com/en/models/892892#profileId-849883

A well working, 30 minute printed BB-gun to annoy your enemies!

3d printed parts:

• partial assembly (print-in-place)
• lever
• cover
• slide (magazine shutter)

hardware (not 3d printed):

• compression spring 0.3x4x20mm → just a “normal” pen spring

(see below at “Bill of Materials”)

• BBs 6mm Airsoft rounds (Ammunition)

Warning

This 3D model of a BB pistol is not a toy. While it may look like one, it can be potentially lethal if misused.

I assume no liability or responsibility for any damage, injury, or legal consequences resulting from the use, reproduction, or modification of this model.

Use responsibly and ensure compliance with all applicable laws and safety guidelines.

Assembly:

Layout of all the necessary parts.

Insert “BBG_Lever” into BBG_Partial_Assembly"

Add “BBG_Cover”

Insert the spring

Shut the magazine with “BBG_Slide”

Enjoy your new addicting Toy! :)