December 15, 2024
Description
This is a magnetic paddle shift for diy simracing wheels.
Hardware needed:
1x 10x3mm round magnet
1x 12mm round magnet (spessor is your choice can be 3mm or 5mm for more force)
2x 5x4.5mm m3 heat insert (you can modify the lever in order to use m3 nuts instead)
2x m3x10mm screw (for the lever)
2x m3x16mm screw (to attach the shifter to the wheel)
1x m5x25mm screw (longer is ok)
1x m5 nut
2x m5x10mm washer
1x hall sensor analog (SS495)
Glue the magnet on the lever with CA glue
License:
Creative Commons — Attribution — Noncommercial
Alby312
