Insert that can block the flashing power led while the Sanremo is in sleep mode
Can be slid up to see all leds in case you want to use the Sanremo menu system (where the Led lights are used to navigate functions)
Design to be as invisible as possible
Printing:
STL is oriented correctly
Part is so small, infill does not matter
I printed it in ASA but can be done in any material
Installation:
The insert snaps in the oval window around the leds
Ensure the slightly thicker portion is oriented on top
If you look closely (and your z-offset was good), there is a small lip around the print. The lip goes towards the machine and should snap slightly behind the metal plate
EDnation
