Magnetic Whiteboard Mount Tray

I was looking for files like this, and most of the files didn't have just a plain tray. Here is a plain tray for erasers, spray bottles, and/or markers. So, I developed a tray that didn't use a ton of filament and was sturdy enough to hold stuff. On the back, there are 2 slots for strong magnets, and I used circles that were 1.25 inches in diameter.

NOTE: I have 2 different files. The first one is for printers that can print one layer with lots of filament without breaks. The second one is for printers like mine that cannot handle a ton of filament at once.

Print instructions

This print failed a couple of times on the slow setting, so it is recommended for medium speed if there is an option.