RakonHeli Sized Frame 76mm

This is a Rakonheli sized Whoop frame!! PRINTED WITH NYLONX. I've revised the frame after several tests with the 1102 size motors. I recommend using the DYS 1102 10000kv motors for best battery life. The finished product weighs in at 35.6g with ll02 motors.
This frame weighs in at 9.30g which is lighter than the original RakonHeli frame and proving to be much stronger.

Parts List:
All nylon screws for hardware
Super S F4 FC with OSD
Fishpepper 5A BB2 48MHz DSHOT600 1-2S 4in1 ESC
Flex-RC 1102 15000kv motors EATS BATTERIES on 2s (RECOMMEND DYS 1102 10000kv motors)
Rakonheli 40mm 3 Blade Transparent Propeller 1.5mm Shaft
RunCam Nano & TX25 vTx
FS-RX2A Pro Receiver

EDIT:
*Prop Guards are 1.50mm thick and substantially stronger. (Nylon)(NylonX)

*Frame now has the option for tube shaped motor wire runs and some added center reinforcing for more rigidity to support the motors properly. (NylonX, Nylon or PETG)(This option is not needed when printed with NylonX)

*Added new battery holder "double twin" (TPU)

EDIT: 6/8/18: I made the camera mounts a bit tighter around the cameras. Also added a frame for the DYS 1102 motors.

Print instructions

Category: Hobby