Simple Box

Intro

After designing a GoPro Hero 10 battery case ( https://www.prusaprinters.org/prints/114279-gopro-hero-10-battery-case ) I made a hollow version to use as small parts storage or organizer.  I find it very useful for my EDC and work-related things I need to store somewhere.

Choose the right size for you!

I made 3 different sizes, for now, to choose from. I'll upload different box sizes if you need to have one.

• Small ( Internal dimensions: 80mm x 42mm x 16.5 mm )
   
• Medium ( Internal dimensions: 90mm x 55mm x 15 mm )
   
• Large ( Internal dimensions: 90mm x 55mm x 25 mm )
   
• I also made a box for 1/4" Hex Bit Ratchet Wrench Tool and FIDGET TOY!!!
  Made by Lumanieri, a really great tool to have every time with you! Check it out!
  ( https://www.prusaprinters.org/social/102193-lumanieri/prints )
  ( https://www.prusaprinters.org/prints/88474-14-hex-bit-ratchet-wrench-tool-and-fidget-toy )

Print Settings

I always use PrusaSlicer settings as a start point and tweak some parameters based on the filament I use or characteristics I need from the final print. 

For this one, I only change print speed by making it a bit faster.

No need for support on this print.

Additional Materials

For this assembly, you will need some kind of metal rods with a diameter of around Ø 2mm and a length of 20 mm. You can use a wire, plastic rods, even m2 screws. The idea is to make a point of rotation for the hinges on the box.

Assembly

The assembly is pretty straightforward. Use the image I uploaded which illustrates step by step how to put everything together.