Modular Photo Studio Light Box

I wanted a simple solution for a photo studio lightbox that could be stored with minimal space. 

Had the idea of using 3mm K-Line sheets and printing some parts to keep them together in a square.

Printing

All the pieces were printed in 0.3mm with 10% infill.

The front corner pieces can be printed like the below picture, has a lot of contact with the bed and each piece prints in under an hour.

↳ Front corner piece on PrusaSlicer

The back corner piece can be a bit trickier to print since it has a “slot” to insert the k-line in every axis. The solution I found was to print like the below picture, with minimal but strong support (honeycomb).

↳ Back corner piece on PrusaSlicer

Assembly

Parts needed:

• 4 FrontCorner.3mf (green)
• 4 BackCorner.3mf (red)
• 5 K-Line 3mm sheets (dimensions can be scaled, I used 500x500mm)