Star Wars Neon Line Art - Boba Fett

"He’s no good to me dead." 🔥

The legend of Boba Fett is as enduring as his battle-worn armor. This latest design is my tribute to the most feared bounty hunter in the galaxy—a minimalist yet bold representation of his iconic helmet, glowing like a neon bounty puck in the darkness.

By day, it’s a sleek, crisp display, but in the dark, the green glow brings it to life, as if straight from the depths of a bounty hunter’s lair. Whether you’re a Mandalorian at heart or just love a good piece of sci-fi art, this one’s for you!

Would you want to see more Mandalorian-inspired designs? Let me know! This is the way. ⚡💚

🎨 These are the filaments I've used

• Bambu Lab Basic PLA Black
• Bambu Lab Basic PLA Glow

Print and assembly instructions

Geometric Art

• 0.20 layer height
• Wall Generator: Arachne
• Top surface pattern: Monotonic
• Infill: 15%
• Color change at layer 21 (4.20mm)

Frame

• Wall Generator: Arachne (otherwise the chances of the print-in-place latches fusing to the frame are higher)
• Infill: 15%
• To loosen the latches move them up a bit before turning them
• Use the latches to secure the artwork into the frame (TIP: add a strip of tape to the back of the artwork where the latch will hold if the latch is too loose)
• When you use the wall hook, make sure you turn the latch under the hook to the locked position before installing the wall hook. Slide the artwork under the locked latch first, position it into the frame and close all other latches

ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Seller subscription.